YangZhou, Jiangsu,China
sales@amtecmc.com
+86 13218821777
No.68, New Ganquan west road,YangZhou, Jiangsu,China
YangZhou, Jiangsu,China
sales@amtecmc.com
+86 13218821777
Steel welded frame with high rigidity.
1. Double crankshafts reverse rotated to eliminate each lateral force.
2. Dry friction clutch and brake with high performance and big torque.
3. Gear pairs:oil bath lubrication.
4. Six-face rectangle lengthened guide.
5. Hydraulic overload protector.
6. Elec.die height adjustment with digital display.
7. Lifting balance cylinder.
8. Imported dual solenoid valve.
9. Electrical forced grease lubrication system.
10. Balance cylinder:manual lubrication.
11. Air-Blowing device.
12. Integrated interface(electrical cam incduded).
13. PLC of intemational brand.
14. Button,switch,air circuit breaker of international brand.
15. Option:air cushion(air bag or cylinder type),light curtain,slide knockout device,automation device.
Eliminate one of the largest maintenance costs of a stamping press: the wrist pin slide connections
Withstands the rigors of heavy progressive die stamping by providing increased surface area to transmit high forces
Hydraulic Overload Protector，Helps prevent damage to the press and dies
Highly rigid press frame, reduced frame deflection for higher precision metal stamping
Color touch screen, easy to view and operate.
UTILIZES HARDENED AND GROUND PINION AND MAIN GEARS
Provides minimal backlash resulting in improved press accuracy
Rigid frame for AH25 model
AngularFramedeflection is 50% or less compared to competition
Welded high grade steel plate construction
Robot welded to ensure weld consistency
Plate width and thickness at the throat area help to minimize angular and rotational deflection
Compact frame design reduces floorspace requirement
Torque transmission plates operate in a bath of oil
Oil film between clutch and brake plates results in low maintenance (change the oil every 2000 hours of operation)
Very little heat generation and component wear so performance does not deteriorate over time
Low heat generation allows high single stroke rates
Faster stopping time than pneumatic dry brakes
Totally enclosed preventing airborne contamination
6 points extra-long gibs surface on the slide, always maintained within the guides provide superior off-center guiding.
Bronze gib linear with recirculating oil lubrication system
Pneumatic combined clutch/brake
Recirculating oil lubrication system
Oil from all lube points is captured, filtered, and recirculated
Bearing points are monitored to ensure that they receive the correct amount of oil
Bearing temperature monitoring and broken lube line detection options available to provide additional protection
| Description/Specification/Type | AH25-80 | AH25-110 | AH25-160 | AH25-200 | AH25-250 | AH25-315 | ||||||||
| I | II | I | II | I | II | I | II | I | II | I | II | |||
| Nominal force | kN | 800 | 1100 | 1600 | 2000 | 2500 | 3150 | |||||||
| Nominal stroke | mm | 5 | 3 | 5 | 3 | 6 | 3 | 7 | 3 | 7 | 3.5 | 7 | 3.5 | |
| Slide stroke | mm | 160 | 90 | 180 | 110 | 200 | 130 | 250 | 150 | 280 | 170 | 280 | 170 | |
| SPM | Fixed | min1 | 55 | 70 | 50 | 60 | 45 | 55 | 35 | 45 | 30 | 40 | 30 | 40 |
| Variable(Option) | 40-75 | 55-90 | 35-65 | 50-80 | 30-55 | 40-65 | 25-45 | 35-55 | 20-35 | 30-45 | 20-30 | 30-40 | ||
| Max die height | mm | 350 | 400 | 450 | 500 | 550 | 550 | |||||||
| Die height adjustment | mm | 80 | 90 | 100 | 110 | 120 | 120 | |||||||
| Between slide center and frame | mm | 310 | 350 | 390 | 430 | 470 | 480 | |||||||
| Bolster(F·B×L·R) | mm | 600×1600 | 680×1880 | 760×2040 | 840×2420 | 920×2700 | 940×2900 | |||||||
| Bolster thickness | mm | 110 | 145 | 130 | 165 | 150 | 185 | 170 | 220 | 180 | 235 | 190 | 245 | |
| Slide area(F·B×L·R) | mm | 460*1200 | 520*1360 | 580×1500 | 650*1850 | 700×2100 | 700*2100 | |||||||
| Shank hole(Dia×Depth) | mm | 3-巾 60×60 | 3-460×70 | 3-*60×75 | 3-4> 60×85 | 3-(b 60×95 | 3-巾60’95 | |||||||
| Between columns | mm | 1200 | 1450 | 1600 | 1900 | 2220 | 2400 | |||||||
| Main motor power | kW | 11 | 15 | 18.5 | 22 | 30 | 37 | |||||||
| Air cushion (option) | Air bag type eject force×Stroke×Qty. | kNxmm | 40*80×2 | 40*80×2 | 40*80×2 | 60x90x2 | 8090×2 | 80x90x2 | ||||||
| Cylinder type eject force×Stroke×Qty. | kNxmm | 40x60x2 | 40x60x2 | 55x70x2 | 80x80x2 | 80x80x2 | 100x90x2 | |||||||
| Bolster height | mm | 900 | 935 | 900 | 935 | 950 | 985 | 1000 | 1050 | 1100 | 1155 | 1100 | 1155 | |
| Outline dimension(F·B×L·R×H) | mm | 2160x1750x3100 | 2250*2040×3260 | 2550x2220x3580 | 2660x2560x3980 | 2880x2860x4320 | 2880*3040×4320 | |||||||
| Net weight | kg | 12340 | 15500 | 22300 | 29500 | 39000 | 47500 | |||||||
| Specification/Model | Unit | AH25-80 | AH25-110 | AH25-160 | AH25-200 | AH25-250 | AH25-315 |
| Max. Die height (D) | mm | 350 | 400 | 450 | 500 | 550 | 550 |
| Die height adjustment (C) | mm | 80 | 90 | 100 | 110 | 120 | 120 |
| Between slide center and frame bed (K) | mm | 310 | 350 | 390 | 430 | 470 | 480 |
| Bolster (JxI) | mm | 600×1600 | 680×1880 | 760×2040 | 840×2420 | 920×2700 | 940×2900 |
| Bolster thickness (T) | mm | 110 | 130 | 150 | 170 | 180 | 190 |
| Slide area(F×E) | mm | 460×1200 | 520×1360 | 580×1500 | 650×1850 | 700×2100 | 700×2100 |
| Feeding shaft position(S×Q×V) | mm | 1565×827×596 | 1715×980×598 | 1895×1082×688 | 2125×1230×748 | 2310×1390×818 | 2325×1480×818 |
| Feed shaft diameter (d) | mm | 40 | 70 | 70 | 70 | 70 | 70 |
| Between frame bed and floor (Z) | mm | 790 | 770 | 800 | 830 | 920 | 920 |
| Between columns (P) | mm | 1200 | 1450 | 1600 | 1900 | 2220 | 2400 |
| Press feet (AxB) | mm | 1750×1710 | 1960×1735 | 2220×2045 | 2560×2285 | 2900×2570 | 3100×2580 |
| Anchor bolt(MxN) | mm | 1560×1410 | 1870×1400 | 2020×1680 | 2360×1910 | 2700×2200 | 2900×2200 |
| Outline dimension(LxWxH) | mm | 2260×1750×3100 | 2400×2040×3260 | 2650×2220×3580 | 2850×2620×3980 | 3080×2960×4320 | 3080×2960×4320 |
Amtec, stands for premium sheet metal processing. We offer pressing, punching, cutting, solutions for all material thicknesses, materials and geometries, and aim to provide customers to purchase Chinese machines with greater confidence, better& timely service. Explore now to view the newest machinery from Amtec.
No.68, New Ganquan west road,YangZhou, Jiangsu,China
Visit us at our HQ for a mean cup of coffe and a fantastic consulting team.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
9am > 5pm
9am > 1pm
9am > 1pm
9am > 1pm
9am > 1pm
9am > 1pm
Closed
