YangZhou, Jiangsu,China
sales@amtecmc.com
+86 13218821777
No.68, New Ganquan west road,YangZhou, Jiangsu,China
YangZhou, Jiangsu,China
sales@amtecmc.com
+86 13218821777
1.Entire steel welded column type frame with high intensity.
2.Double crankshafts reverse rotated to eliminate each lateral force.
3.Dry friction clutch with high performance and big torque.
4.Hydraulic overload protector.
5.Eight-face lengthened guide with high accuracy.
6.Electrical die height adjustment with digital display.
7.Lifting balance cylinder.
8.Imported dual solenoid valve.
9.Electrical forced grease lutbrication system.
10.Balance cylinder:manual lubrication.
11.(1)set blowing device.
12.PLC of international brand.
13.Buton,AC contactor,air circuit breaker of intemational brand.
14.Integrated panel(elec.cam,touch screen included).
15.Optional:wet clutch,air cushion,NC feeder device,light curtain motor with inverter to adjust spm,slide knockout device.
16.AMD36 series presses equipped with multi-link for light drawing.
Eliminate one of the largest maintenance costs of a stamping press: the wrist pin slide connections
Withstands the rigors of heavy progressive die stamping by providing increased surface area to transmit high forces
Hydraulic Overload Protector，Helps prevent damage to the press and dies
Highly rigid press frame, reduced frame deflection for higher precision metal stamping
Color touch screen, easy to view and operate.
Eight points of gib adjustment allow easy setting to maintain slide to bolster parallelism of less than 0.15mm
Flat surfaces provide resistance to lateral movement of the slide, left to righ, and front to back
Estra-long gib surface on the slide, always maintained within the guides provide superior off-center guiding.
Bronze gib linear with recirculating oil lubrication system
UTILIZES HARDENED AND GROUND PINION AND MAIN GEARS
Provides minimal backlash resulting in improved press accuracy
Torque transmission plates operate in a bath of oil
Oil film between clutch and brake plates results in low maintenance (change the oil every 2000 hours of operation)
Very little heat generation and component wear so performance does not deteriorate over time
Low heat generation allows high single stroke rates
Faster stopping time than pneumatic dry brakes
Totally enclosed preventing airborne contamination
Recirculating oil lubrication system
Oil from all lube points is captured, filtered, and recirculated
Bearing points are monitored to ensure that they receive the correct amount of oil
Bearing temperature monitoring and broken lube line detection options available to provide additional protection
Pneumatic combined clutch/brake
| Unit | AM36-110 | AM36-160 | AM36-200 | AM36-250 | AM36-315 | AM36-400 | AM36-500 | AM36-630 | AM36-800 | |
| Max. Die height (D) | mm | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 800 | 800 |
| Die height adjustment (C) | mm | 90 | 100 | 110 | 120 | 120 | 120 | 120 | 120 | 120 |
| Slide area (ExF) | mm | 580×1360 | 660×1580 | 740×1900 | 820×2100 | 900×2200 | 1000×2300 | 1100×2600 | 1200×2800 | 1200×3000 |
| Bolster (IxJ) | mm | 680×1650 | 760×1920 | 840×2250 | 920×2450 | 1000×2500 | 1100×2500 | 1200×2900 | 1300×3000 | 1300×3200 |
| Bolster thickness (T) | mm | 130 | 150 | 170 | 180 | 190 | 200 | 210 | 220 | 240 |
| Side opening (KxG) | mm | 650×350 | 880×500 | 930×550 | 990×650 | 990×650 | 1020×650 | 1040×700 | 1200×800 | 1200×800 |
| Between columns (P) | mm | 1750 | 1970 | 2300 | 2500 | 2600 | 2700 | 3100 | 3300 | 3500 |
| Between frame bed and floor (Z) | mm | 820 | 820 | 830 | 920 | 930 | 1000 | 1040 | 1080 | 1160 |
| Press feet (AxB) | mm | 2470×1670 | 2690×1670 | 3290×2270 | 3300×1950 | 3400×1995 | 3480×2420 | 3920×2805 | 4160×2796 | 4430×3090 |
| Anchor bolt(MxN) | mm | 2100×1250 | 2320×1250 | 2650×1350 | 2940×1500 | 2970×1500 | 3080×1795 | 3500×2070 | 3740×2126 | 3960×2420 |
| Outline dimension(LxWxH) | mm | 2250×2370×3500 | 2480×2590×3610 | 2680×3120×3930 | 2880×3370×4280 | 3420×3500×4665 | 3700×3650×4900 | 3850×4100×5100 | 4520×4310×6200 | 4600×4600×6450 |
| Specifications | AM36-110 | AM36-160 | AM36-200 | AM36-250 | AM36-315 | AM36-400 | AM36-500 | AM36-630 | AM36-800 |
| Nominal force | 1100 | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 | 6300 | 8000 |
| Nominal stroke | 5 | 6 | 7 | 8 | 8 | 10 | 10 | 10 | 10 |
| Slide stroke | 180 | 200 | 250 | 280 | 280 | 280 | 280 | 280 | 280 |
| Fixed SPM | 50 | 45 | 35 | 30 | 25 | 20 | 18 | 18 | 18 |
| Variable SPM (Option) | 35-65 | 30-55 | 25-45 | 20-35 | 20-30 | 18-25 | 15-20 | 15-20 | 15-20 |
| Max die height | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 800 | 800 |
| Die height adjustment | 90 | 100 | 110 | 120 | 120 | 120 | 120 | 120 | 120 |
| Bolster (F.B x L.R) | 680x | 760x | 840x | 920x | 1000x | 1100x | 1200x | 1300x | 1300x |
| 1650 | 1920 | 2250 | 2450 | 2500 | 2500 | 2900 | 3000 | 3200 | |
| Bolster thickness | 130 | 150 | 170 | 180 | 190 | 200 | 210 | 220 | 240 |
| Slide area (F.B x L.R) | 580x | 660x | 470x | 820x | 900x | 1000x | 1100x | 1200x | 1200x |
| 1360 | 1580 | 1900 | 2100 | 2200 | 2300 | 2600 | 2800 | 3000 | |
| Shake hole (DiaxDepth) | 3-60×70 | 3-60×95 | 3-60×95 | 3-60×95 | 3-70×95 | 3-70×95 | 3-80×105 | 3-80×115 | 3-80×150 |
| Between columns | 1750 | 1970 | 2300 | 2500 | 2600 | 2700 | 3100 | 3300 | 3500 |
| Side opening (F.B x H) | 650x | 880x | 930x | 990x | 990x | 1020x | 1040x | 1200x | 1200x |
| 350 | 500 | 550 | 650 | 650 | 650 | 700 | 1800 | 1800 | |
| Distance between bolster surface and floor | 950 | 970 | 1000 | 1100 | 1120 | 1200 | 1250 | 1300 | 1400 |
| Main motor power | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 |
| Air cushion (Option) | 40x | 80x | 80x | 80x | 100x | 100x | 100x | 100x | 100x |
| (Eject forcexStrokexQty) | 60×2 | 80×2 | 80×2 | 80×2 | 90×2 | 90×2 | 90×2 | 90×2 | 90×2 |
| Outline dimensions | 2250x | 2480x | 2680x | 2880x | 3420x | 3700x | 3850x | 4520x | 4600x |
| (F.B x L.R x H) | 2370x | 2590x | 3120x | 3370x | 3500x | 3650x | 4100x | 4310x | 4600x |
| 3500 | 3610 | 3930 | 4280 | 4660 | 4900 | 5100 | 6200 | 6450 | |
| Net weight | 18000 | 20520 | 31000 | 37740 | 47000 | 52000 | 67500 | 95000 | 120000 |
Amtec, stands for premium sheet metal processing. We offer pressing, punching, cutting, solutions for all material thicknesses, materials and geometries, and aim to provide customers to purchase Chinese machines with greater confidence, better& timely service. Explore now to view the newest machinery from Amtec.
No.68, New Ganquan west road,YangZhou, Jiangsu,China
Visit us at our HQ for a mean cup of coffe and a fantastic consulting team.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
9am > 5pm
9am > 1pm
9am > 1pm
9am > 1pm
9am > 1pm
9am > 1pm
Closed
